Freely adjustable speed/torque

Low-impact slow-stop

Drill/screw with one device

Type-C charging port

Supplied with adaptor in compliance with local standards

Powerful brushless motor Stable and reliable performance.

Electromechanically integrated design for safe and spark-free operation. Low motor wear, low noise output, and high power conversion. No need to replace carbon brushes, resulting in longer service life.

Max torque 30N·m*

Max. speed* 1400rpm*

Long battery life

Stable operation

Smart displayAll-new interactive experience.

High-resolution display with real-time display of the current operating mode and manual gear speed. Revolutionizing conventional tool concepts and keeping the power in your hands.

Automatic mode

screw-in/ out

Manual mode

Manual gear setting

Pulse mode

Battery level

Three-mode switching with one-key to meet a variety of operating scenarios.

Switch between the three operating modes at any time by touching the button at the bottom of the display. From beginners to professionals, from casual to renovation, meets the needs of different groups of people in a variety of scenarios with one click.

A Automatic Smart Mode

M Manual Mode

Pulse Mode

M Manual Mode for precise 30- stage Gear Adjustment.

360° infinite knob with up to 30 gear stages, which can be adjusted incrementally or by rotating quickly through the gears. Depending on the drilling/screwing mode, the maximum torque or speed can be controlled separately for precision and accuracy to meet the advanced needs of professional users.

Drilling Mode.

30-speed incremental adjustment of the maximum speed

Screwdriving Mode.

30-speed incremental adjustment of the torque output.

A Automatic Smart Mode Smooth & Worry-free automatic torque detection.

The built-in smart chip automatically matches the appropriate torque to the application scenario. Screwdriving mode automatically locked after tightening, avoiding breakage or cracks due to over-turning.

Safe pulse mode

Easy control of intermittent starting and stopping.

The safe-pulse mode is more suitable for beginners, thanks to the embedded intelligent speed control chip. Plus, the intermittent rotation start/stop ensures safe operation. It also effectively minimizes damage to the soft material.

Suitable for a variety of materials adapting multiple operation scenarios and a wide range of applications.

Effortless screw/ drilling on woods such as soft pine and hard beech, metals such as aluminum tubes and steel plates, and plastics such as water pipes and acrylic.

* Not suitable for use on concrete

Walls (* Non-load-bearing walls)

Wooden furniture

Wood

Acrylic plates

PVC pipes

Aluminum alloy extrusions.

Drilling/screwdriving ModesMultiple Functions & Easy-Switching.

Easily switch between drilling and screwdriving modes with a single push and twist. The built-in all-metal variable speed gearbox meets the needs of different speeds in a variety of usage scenarios.

Infinite gear switching low-stop on release to enhance safety.

Infinitely variable trigger and the speed gradually increases with the pressing force. The slow-stop design can protect the user in high torque mode.

Minimalist screwless design

A modern take on traditional tool design.

In keeping with the minimalist design of Xiaomi screwdrivers, the body has smooth lines and no visible screws on the surface. The grip is designed to fit perfectly in your hand for a more comfortable and safe operation.

Sophisticated surface finishes are designed for a more comfortable grip.

The metal coating and UV topcoat create a high-quality matt metallic finish that is scratch and stain-resistant. The entire device is made of PC+ABS high-strength engineering plastic, which is robust and durable. The front of the grip is covered with matt TPU soft rubber for a comfortable, non-slip feel and is not prone to the usual yellowing and stickiness.

Cordless, portable design large capacity, and long battery life.

built-in 2000mAh high-quality lithium battery with a capacity of 550+ self-tapping screws* on a full charge. The innovative battery design eliminates the need for additional bulky battery packs.

22+ Successive penetrating into 6mm steel plates*

280+ Successive drilling of 4cm-deep holes on wooden board*

Extensive testing for guaranteed quality

Comprehensive product safety tests
Heat and flame resistanceDurabilityAbnormal operationMechanical strengthStructureInternal wiringScrews and connectionsProtection against contact with live partsHeat generation

Safety requirements for the battery protection circuit

Overvoltage charging protection overcurrent charging protection Overload protection short-circuit protection

Screwdriver bit tests

Neutral salt spray (NSS) test (10h salt spray anti-rust test)Magnetic test (magnetic attraction with 18mm steel ball)Surface qualityHardness test

RoHS test

RoHS tested to national standardsTSCATPCHCE RoHSREACH

Safety test

Temporary voltage drops and short-term interruptionImmunity testElectrical fast transient/burst (EFT/B) immunitySurge (impact) immunity testElectrostatic discharge (ESD) immunityRadiated electromagnetic field immunityCE safety CE EMC FCC

Environmental reliability test

Low-temperature test (48h at -20°C, normal operation after returning to room temperature) High-temperature operation (2h at 40°C)High-temperature test (48h at 70°C, normal operation after returning to room temperature)Low-temperature operation (2h at -10°C)Constant temperature and humidity test (24h at 40°C and 93%RH, normal operation after returning to room temperature)Rapid change temperature and humidity.Thermal shock test (3h at -20°C → 3h at 60°C for 8 cycles)

Safety requirement tests for lithium-ion batteries and battery packs

External short-circuit at room temperature. External short-circuit at high temperature (55℃)OverchargingForced discharge low pressure (simulated altitude of 15,240m for 6h)Temperature cycling (6h at 72°C–6h at 40°C for 10 cycles)VibrationAcceleration impactDropHeavy weight impact thermal abuse (heating to 130°C at 5°C/min)Flame spraying (heating the battery with a flame until it burns completely without exploding)Operation at high-temperature PCB Scheme test Electromagnetic compatibility (EMC) test

* Not all tests are listed in the chart; for reference only.

Universal Type-C charging port rapid charge adaptor for charging at any time supplied with a 1m Type-C rapid charging cable and charging adaptor, with a universal Type-C charging port for convenient charging at any time.

Wide range of accessories ideal for most operational requirements24 different types of S2 steel bits in 9 common categories, hardened to a maximum of 60HRC* for toughness and durability. The 60mm magnetic extension rod covers a wide range of applications. Eight different sizes of woodworking bits and metal twist drills meet the requirements for drilling a wide range of materials. Wood drill bits metal drill bits

Water-repellent storage pouch*Simple and compact design. The portable storage pouch is made of water-repellent fabric. The main unit, accessory case, adaptor, and charger can all be stored in the bag, so you can easily and conveniently carry them all with you.

Old and new extension rod designs shipped at random external changes to the product. Old design new design this update does not affect the quality of the product or the effectiveness of its use. Please be assured when purchasing that both extension rod designs are genuine accessories.

Powerful brushless motor with lithium battery

CORDLESS DRILLS